

Extend USB 2.0 devices up to 100 metres over a single CAT cable, with one of Blustreams USB extension systems.
Each of the USB extension systems are completely plug and play, meaning no driver installations or setup is required. Along with the USB signal, Blustreams extenders can transport RS-232, KVM, audio and 2-way IR over CAT.
The UEX100E-KIT is Blustreams 100 metre USB extender that utilises HDBaseT technology to extend the data. The HEX70USB-KIT on the other hand, delivers HDMI to lengths of 70 metres, along with USB 2.0.
The HEX70HDUK-KIT extender set is an industry leading HDMI2.0 4K 60Hz 4:4:4 (18Gbps) HDCP2.2 HDBaseT™ multi-format solution utilising CSC technology to deliver HDMI, USB-C and DisplayPort™ up to lengths of 40m (70m at 1080p) over a single CAT cable.
The HEX70HDUK-KIT provides enhanced features including USB 2.0 extension, local HDMI input on the HDBaseT™ Receiver for additional source input, web-GUI for control and configuration, auto display control, audio breakout and bi-directional IR pass-through.
The HEX70HDUK-KIT also features control via front panel, IR, RS-232 and TCP/IP, PoC (Power over Cable), and advanced EDID and HDCP management.
HEX70HDUK extender kit
The HEX70USB-KIT 4K HDBaseT USB 2.0 extender set, offers the very best in performance and flexibility.
Deliver HDMI to lengths of 70M (4K 60Hz 4:2:0 to 40M), USB 2.0 extension, bi-directional IR and RS-232, HDMI audio breakout, bi-directional PoC, and advanced EDID management.
The kit lets you connect 4 USB type-A devices (RX – peripherals) and 1 USB type-B (TX – host) that support a combined data transmission bandwidth of up to 280Mbps.
The UEX50B-KIT delivers USB 2.0 extension up to 50 metres over a single CAT cable.
Users can connect up to 4 USB peripheral devices to 1 UEX50B-KIT, meaning spaces utilising multiple USB devices only need one extension system.
The device supports a combined transmission data bandwidth of up to 480Mbps, and is backwards compatible with USB 1.1 devices.
Simple USB plug and play with the UEX50B-KIT means no driver installation or setup is required.
The UEX100E-KIT is a USB extender kit, utilising HDBaseT technology to extend USB 2.0 data, 2ch analogue audio, and control signals up to 100m over a single CAT cable.
The extension system allows connection of up to 4 USB devices, with support for a combined transmission data bandwidth of up to 480Mbps. It’s also backwards compatible with USB 1.1 devices.
It also provides bi-directional Power over Cable, bi-directional IR, RS-232, 2ch analogue audio, and 100Mbps Ethernet/LAN pass through.
Simply plug and play, no driver installation or setup is required.