DA44AU

The DA44AU is a four input / four output Dante digital audio converter.

The DA44AU allows any non-Dante audio source such as mixing consoles, amplifiers, computers and Blustream Matrix / distribution products to be connected as an audio source within a Dante network. In addition, it can convert a Dante signal back to an analogue audio signal.

It supports both balanced and unbalanced audio, as well as microphone line level inputs inc. 48V phantom power. In addition, it also support AES67 RTP audio transport.

  • Independent input gain settings per channel.
  • Audio Input – 12-pin Phoenix connector.
  • Audio Output – 2 x RJ45 Female.
Blustream - DA44AU - Dante Audio Solutions

Blustream - DA11AEN

DA11AEN

The DA11AEN has been designed to encode unbalanced or balanced 2ch analogue audio to Dante digital signal.

The device allows any non-Dante audio source such as mixing consoles, amplifiers, computers and Blustream matrix products or distribution products, to be connected as a source within a Dante network.

The DA11AEN is a plug & play device, that is powered using PoE (Power over Ethernet) from any PoE network switch and supports AES67 RTP audio transport.

  • Audio Input – 6-pin Phoenix connector.
  • Audio Output – 1 x RJ45 Female.

DA11ADE

The DA11ADE has been designed to decode a Dante digital signal to unbalanced or balanced 2ch analogue audio.

Its a plug & play device that is powered using PoE (Power over Ethernet) from any PoE network switch. The DA11ADE also supports AES67 RTP audio transport.

The DA11ADE could allow you to utilise a new analogue device with an existing Dante infrastructure, or vice versa, a new Dante device with an existing analogue infrastructure.

  • Audio Inputs – 1 x RJ45 Female.
  • Audio Outputs – 6-pin Phoenix connector.
Blustream - DA11ADE

DA11USB

The DA11USB has been designed to both encode 2ch USB audio to a Dante® digital signal, and decode a Dante® digital signal to 2ch USB audio.

The DA11USB features both USB Type-B and USB-C connections, selectable via a switch, and is a plug & play device that is powered either using PoE (Power Over Ethernet), or with 5V from the USB device. The DA11USB also supports AES67 RTP audio transport.

DA22DIG

DA22DIG has been designed to both encode 2ch analogue or digital audio to a Dante® digital signal, and decode a Dante® digital signal to 2ch analogue and digital audio.

The DA22DIG features both analogue audio and digital audio connections, selectable via dip-switch and is a plug & play device that is powered using PoE (Power over Ethernet), or via 12V power supply. The DA22DIG also features support for microphones including 48V phantom power, as well as support for AES67 RTP audio transport.

  • Selectable digital audio between optical toslink and coaxial RCA inputs

DA11ABL-WP

The DA11ABL-WP is a multi-input / output wall plate to convert Bluetooth and analogue audio within a digital Dante® networked audio system. The DA11ABL-WP converts 2 x input channels of Bluetooth, or unbalanced audio to Dante® digital audio, and 2 x channels of Dante® audio to 2 x output channels of unbalanced audio. Software configuration for the DA11ABL-WP allows for the Bluetooth name to be amended as required where being deployed in multi-user spaces.

The DA11ABL-WP is a plug & play device that is powered using PoE (Power over Ethernet), or via 12V power supply, offers support for AES67 RTP audio transport, and magnetic faceplate design allows for Decora backbox compatibility. The DA11ABL-WP is the ideal BYOD interface to allow any Bluetooth device to stream audio wirelessly to a Dante® audio system.

DA22XLR-WP-EU

The DA22XLR-WP is a multi-input / output wall plate to convert analogue audio within a digital Dante® networked audio system.

The DA22XLR-WP features 2 input channels of balanced / unbalanced / MIC audio with switchable 48v phantom power and 2 output channels of balanced / unbalanced audio.

The DA22XLR-WP is a plug & play device that is powered using PoE (Power over Ethernet), or via 12V power supply, offers support for AES67 RTP audio transport and magnetic faceplate design allows for both UK backbox compatibility.